|
|
Calibrators |
|
|
|
| PIECAL - Accurate • Reliable • Easy to Use |
|
|
|
|
|
Model 511B
Ten Type RTD Plus Ω Simulator
The PIECAL 511B simulates RTD resistances into all types of instruments such as transmitters, recorders, controllers, alarms, data acquisition, and computer systems. The PIECAL 511B is a superior replacement for decade boxes, so there is no need to lug a decade box around or be prone to error by reading RTD tables incorrectly. The PIECAL 511B has better accuracy and functions of many higher priced RTD calibrators.
- Accurate to ±0.25°C (±0.5°F) for Pt 100 Ohm RTD’s with 0.1° Resolution
- Simulates 10 RTD curves with Direct Temperature Output or Ω
- Selectable °C or °F
- Curves included for Platinum 100 and 1000 Ohm, Nickel 110 and 120 Ohmas well as for Copper 10 and 50 Ohm
- Guaranteed to Work with All Pulsed Instruments
- Works with a wide variety of transmitters including popular Rosemount and Honeywell Models
- Compatible with devices using pulsed excitation currents including PLCs, DCS, Recorders, and all others
- EZ-Dial™ Knob with two dialing speeds makes adjusting output easy
- EZ-Check™ switch can store settings for 0% and 100% span adjustments
- Uses standard "AA" Alkaline Batteries
- Superior battery life of 45 hours under typical continuous usage
- Easy access to battery compartment
- Lightweight and Rugged with a Solid Feel
- Small and tough
- Protected to 60V
- Optional Rubber Boot, Carrying case and Test Data available
- NIST Traceable Calibration Certificate included FREE
For more information, please view the datasheet.
|
| Advantages of the PIECAL 511B over the Altek 11 |
 |
| • |
Continuously select output temperatures
Works will all instrument ranges across the full range in degrees C & F. Not limited to 11 temperature steps!
|
| • |
Works with Pt 100 & 1000 Ohm, Cu or Ni RTDs
One simulator replaces ALL the types and ranges of
the Altek 11
|
| • |
Instantly select output three temperatures
Flip the EZ-Check™ switch to calibrate zero, span and mid-point |
| • |
LCD display with backlight
Easy viewing in dark locations |
| • |
More resistant to accidental damage
Reconfigure without resetting calibrator
|
| • |
Includes Certificate of Calibration
All PIECAL Calibrators come with a free signed and dated certificate. Altek's come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.
|
|
Altek 11 Discontinued! |
| |
| |
| |
| For more information, please view the datasheet. |
|
| |
| |
| |
| |
| |
|
|
|
