PIECal Logo
Calibrators
Miscellaneous

Quick Find
Model #
Help?
~ or ~
Click to list all products
PIECAL - Accurate • Reliable • Easy to Use
Home Products Altek and PIE Repair and Calibration Services Find a Rep About Us Contact Us

enlarge
422
pdf document Datasheet
pdf document Operating Instructions
pdf document Operating Instructions (Pre 2014)
pdf document Advantages over Fluke 714 and Druck 821
Field Calibration Procedure
Pricing:
Factory Pricing
Find a Rep map


For more information:
Fill out our Information Request Form
call us at: (585) 872-9350
or
e-mail us at: sales@piecal.com
Automated Thermocouple Calibrator - 14 T/C Types
PIECAL 422

•  Source and Read Fourteen T/C Types plus mV
J, K, T, E, R, S, B, N, G, C, D, L (J DIN), U (T DIN) & P (Platinel): -13.000 to 80.000 mV
422 showing connections
•  Calibrate with Confidence
Resolution to 0.1 F & C; Accurate to 0.2
Cold Junction Sensor Accurate to 0.05C
•  Perform Heat Treating Surveys & Accuracy Tests
Meets or exceeds the requirement of AMS 2750 as both a Secondary Standard Instrument and as a Field Test Instrument
•  Faster Calibrations
Instantly select three outputs with EZ-CHECK switch
Easily find trip points with two speed EZ-DIAL knob & Automatic Stepping
•  Easily Change T/C Types & Scale
Double click to select T/C type & F & C
•  Easy-to-Read Display
Turn on the backlight to read in dark areas of the plant
•  Use in the Plant, Field or Shop
Includes Rubber Boot and mV Test Leads
Low profile switches resist accidental damage
Brass screws for T/C wires plus mini T/C socket
•  Simple "No Tool" Battery Changes
Four inexpensive "AA" batteries
•  Verify Cold Junction Temperature & Output
Secondary Display of compensated millivolt setting and cold junction temperature
•  Optional Accessories
Wire & Mini T/C Plug: J, T, E, K (020-0202); B, R/S, K (020-0203)
New! Screw terminal for T/C wire plus miniature T/C socket
 
Advantages of the PIECAL 422 over the Altek 422
PIE 422
•  Automatic Stepping & Ramping
•  Larger Display with Backlight
Easy viewing in dark locations
•  More Resistant to Accidental Damage
Rubber Boot and Stronger Switches
•  Separate Battery Compartment
No more removing housing with screwdriver to replace batteries
Calibration seals remain intact
•  More Accurate and Repeatable
NIST Traceable Cold Junction Sensor in isothermal block
•  Easily Change Thermocouple Types
Reconfigure without resetting calibrator
•  Verify Cold Junction Temperature & Output
Secondary display of compensated millivolt setting and cold junction temperature
•  Includes Certificate of Calibration
All PIECAL Calibrators come with a free signed and dated certificate. Altek's come only with an unsigned Statement of Calibration Practices with a certificate of calibration available for an extra charge.
Altek 422
 
 
 
For more information, please view the datasheet.
 
 
 
 
 

Home Products Services Find a Rep About Us Contact Us
 
Copyright © 2002-2014 Practical Instrument Electronics, Inc. (PIE)
* PIECAL Calibrators are not manufactured or distributed by Fluke Corp.,Transmation Inc. or Altek Industries, Inc., manufacturers of Transmation and Altek Calibrators.
Privacy Policy